With our temperature resistant PUR-Liner and our thermo resins, theopportunity arises to rehabilitate larger diameters and longer jobs withalmost no time pressure.
Important: Data given here is based on laboratory results and dependant on the liner diameter, the thickness of the material and condition of the felt. We suggest testing the materials under job site conditions. The unprotected liner area needs to be supported whilst inverting. Prior to inversion, a testing of the resin should be carried out, if it is not a compatible product with the I.S.T. GmbH product range.
| TECHNICAL DATA |
| Material: |
polyester-needle felt, approx. 1.64 or 2.62 oz/ft² |
| Coating: |
polyurethane - 1.31 oz/ft² |
| Seam bonding: |
welded and with tape sealed |
| Temperature capacity: |
approx. 176 °F |
| Procedure: |
inversion with/without calibration hose |
| Inversion: |
from 4 psi to max. 17 psi |
| Material thickness: |
0.18" to 0.83" |
| In cooperation with: |
„Easy POX“ epoxy resin |
| Sizes: |
DN 150 to DN 1200 |
| Roll lengths: |
164 ft or 328 ft or requested lengths |
|
